Epson DH200 Benutzerhandbuch

14

Using the System

The system can display channels in full-screen single channel, quad, and multi split-screen 
displays.

Repositioning Channels

You can reposition the channels on the display screen. This can be very useful when monitoring a 
live location(s).

To reposition the display channels:
1. Using the mouse, remote control, or front panel, place the main display screen in either a 

quad display, or in a multi split-screen configuration.

Repositioning will not work if the main display screen is in full-screen single channel.

1. Using the mouse, right-click anywhere on the screen to open the Virtual Remote.

2. From the Virtual Remote, click 

. 

The Blue Window cursor appears in the top-left channel 

(typically channel 1).

3. Reposition the channels through the following:

• Remote Control: Press the button for the channel you wish to place in the location of the Blue 

Window cursor. For example, if the cursor is on channel 1, and you want to have channel 4 in 
its location, press the 4 button on the remote control

•  Front Panel: Press the button for the channel you wish to place in the location of the Blue 

Window cursor

4. Press the S

TWX

 to change the location of the Blue Window cursor.

5. Press the 

 button to save your settings.

(16-channel 

models only)

Figure 6.0 Blue Window cursor is in channel 1

Press the 3 button to move channel 3 to the channel 1 
position.

Figure 6.1 Channels repositioned 

Channel 3 is now in the channel 1 position.