Epson DH200 Benutzerhandbuch

31

Using the Main Menu

UPDATE

Use the Update menu to upgrade system 
firmware.

The system supports most major 

brands of USB flash drives with a capacity 
of 10 MB ~ 16 GB.

To upgrade firmware:
1. Download the latest firmware update from 

the Digimerge website.

2. Copy the firmware to a blank USB flash 

drive.

Do not have any folders on the USB 

flash drive—just the firmware file.

3. Connect the USB flash drive to the USB 

port on the front panel.

4. Stop all recording on the system.

You must stop all recording in order 

to perform the upgrade.

5. Open the Main Menu and select 

.

6. Under the UPDATE tab, select 

.

7. Select 

 and press the 

 button. 

Firmware upgrade begins. 

Do not

 remove 

the USH flash drive until the upgrade 
process is complete. 

Do not 

press any 

buttons or power off the system during the 
upgrade process.

When upgrade is finished, press the ENTER button 
in the prompt window to restart the system.

INFO

View important system information:

• MODEL: The model of the system

• DOMAIN NAME: Your Digimerge DDNS 

domain name

• MAC: The physical address of the DVR on 

your network

• LANGUAGE: The current system language

• NETWORK: The IP address of the system

• INTERNAL HDD: 1 HDD, size and space 

remaining

• USB PORT: The status of the USB port on 

the rear panel—will show "NONE" or 
"CONNECT"

• MOUSE PORT: The status of the USB 

mouse port on the front panel—will show 
"NONE" or "CONNECT"

• IDE BUS: The status of the HDD—will show 

"GOOD" or "ERROR"

Figure 19.3 Update menu

Figure 19.4 System Info menu