Epson DH200 Benutzerhandbuch

57

Virtual DVR

Once you have created a Virtual DVR, you can register DVRs and cameras to that Virtual DVR.

To configure a Virtual DVR:

1. From Live viewing, double-click a Virtual DVR icon from the Virtual DVR Indicator at the 

bottom of the main screen. The 

X

 indicator appears on the icon and a blank split-screen 

appears on the main screen.

2. Use the Split-screen selector in the right of the main screen to a select a split-screen mode.
3. Drag a DVR from the DVR Indicator to a desired location on the screen.
4. Add DVRs to the Virtual DVR:

• Click and drag a DVR from the DVR Indicator to a desired channel on the screen

NOTE: Cameras will be added in numerical order from the selected channel to the end, depending on 
the number of cameras connected to the DVR

4. Add cameras to the Virtual DVR:

• Select a DVR from the DVR indicator

• Drag specific cameras to a desired channel on the screen

NOTE: The newly selected camera will replace the existing camera if there is a conflict.

Figure 30.2 Virtual DVR Indicator

Figure 30.3 Add a DVR—DVR1 (4CH DVR) is added to channel 4 on the screen

Figure 30.4 Add a Camera—CH 1 from DVR 2 is added to channel 8 on the screen