Epson DH200 Benutzerhandbuch

61

Remote Setup

To configure Camera options:

1.

Select a 

 at the top of the window.

2.

For the selected camera configure the 
following:

• COVERT: Select YES/NO. If YES, the camera 

channel will be obscured from live viewing to 
give the impression that no camera is 
recording. Use this option if the display 
monitor is in public view.

NOTE: The Covert channel will use the same 
background color as a disconnected 
camera. To change the background color, 
see see “DISPLAY” on page 60.

• BRIGHTNESS, CONTRAST, COLOR: Adjust 

from 0~100.

• TITLE: enter a name/title for the camera

• PTZ MODEL: Select the model of your 

connected PTZ camera from the drop-down 
menu

• PTZ ID: Enter your PTZ ID (PTZ ID should 

match the camera channel to which you have 
connected the PTZ camera)

3.

Repeat steps 1~2 for any remaining cameras.

4.

Click 

 and then 

 to save your 

settings and close the window.

To configure Motion options:

1.

Under RECORD TIME, adjust the time from 

~

 seconds.

NOTE: The set recording time is applicable 
to all channels.

2.

Under CAMERA SELECT, select a camera icon.

3.

Under SENSITIVITY, and adjust from 

. The 

higher the number, the greater the sensitivity.

4.

Under MOTION GRID, 
click one of the grid 
icons to apply a 
motion grid to the 
selected camera.
NOTE: Disabled 
blocks are colored 
grey. Active blocks will 
be 

turquoise-colored 

when motion is 
detected.

5.

Repeat steps 1~4 for any remaining cameras.

6.

Click APPLY and then OK to save your settings 
and close the window.

Figure 33.0 Camera options

Figure 34.0 Motion options

Figure 34.1 Motion icons