JVC SR-DVM700U Benutzerhandbuch

●

If the dubbing is paused while the channel is set to 

ADVB, you 

cannot switch channels.

To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press selection keys
to select 

.

Locate the point where you want to restart dubbing by pressing 

I,

N, or O, then press o.
Press selection keys to select 

, then press ENTER to 

restart dubbing.

Recording Mode
MPEG2 format is used as recording format. As a guide for picture 
quality, the 

AbpsB unit is used to represent how much data can be 

recorded per second. The larger this value is, the better the picture 
quality becomes but more capacity is required for the recording. 
Select XP or SP for programs where quick movement occurs, such 
as sports programs, and LP or EP for talk shows, etc. with 
relatively less movement.
The recording modes for a 4.7 GB disc are set as follows:

●

For details on FR mode, refer to 

AFree Rate FunctionB on the 

right column.

The recording modes for the HDD are set as follows:

●

For details on FR mode, refer to 

AFree Rate FunctionB.

NOTE:
The maximum recording time stated in the above table are the 
approximate time under unused condition.

To record the entire program, the unit automatically sets the 
appropriate recording mode depending on the combination of the 
total time of the program to be recorded and either the remaining 
disc space or the specified recording time (from 60 minutes to 480 
minutes).

8 To record the entire program within the actual remaining 

Select 

AFR (JUST)B in a recording mode selection procedure.

●

Note that this function is available only when dubbing from HDD 
to DVD (

A pg. 46).

8 To record the entire program by specifying the desired 

Select 

AFR60–FR360B, AFR420B or AFR480B in a recording mode 

selection procedure.

8 To record a 25-min. long program five times on the same 

Be sure to set the recording mode to 

AFR125B to fit the total 

recording time to the whole disc space.

When the same program is recorded in SP mode instead of in 

AFR125B, the 5th program cannot be recorded.

●

The maximum recording time of FR (JUST) mode is the same as 
the recording time of FR480 mode. When dubbing a long 
program in FR (JUST) mode on a disc whose remaining time is 
short, it is recommended to check the disc remaining time in 
FR480 mode to see if the remaining time is enough for the 
program.

●

In order to ensure that the recording fits on the disc, this feature 
may leave a slight non-recorded section at the end of the disc.

●

There may be some noise and sound disturbance at the point on 
the disc where the unit switches the mode.

camcorder
A Perform steps 1 – 4.

B Locate the point from where you want to start dubbing, 

then stop on the DV equipment.

●

If you pause the DV equipment in this step, a few 
second’s still picture will be recorded at the beginning of 
the recorded program.

C Set the input mode to ADV INPUTB on the DV equipment.

●

If you select an input mode other than 

ADV INPUTB,

unwanted pictures may be recorded at the beginning of 
the recorded program.

D Perform steps 9 – 12.

XP

10 Mbps

1 hour

SP

5 Mbps

2 hours

LP

2.5 Mbps

4 hours

EP

1.6 Mbps

6 hours

FR

60-360

The amount varies 

depending on the 

selected time.

1 – 6 hours

420

7 hours

480

8 hours

DV

18 hours

XP

53 hours

SP

109 hours

LP

218 hours

EP

328 hours

FR480

473 hours

Blank

A: 1st
B: 2nd
C: 3rd
D: 4th
E: 5th

A: 1st
B: 2nd
C: 3rd
D: 4th
E: Blank (20 min.)

Blank