Maxtor 4Channel Stand-alone DVMR Benutzerhandbuch
![Maxtor](https://files.manualsbrain.com/attachments/56a4df9f4204e875d87bba2a1fa370e25b7b5a9c/common/fit/150/50/f5eec072d651c7843e562f5f1598920a52c4840f9b47fac011ac6482918d/brand_logo.jpeg)
40
CHAP. 6 Network Setup
Setting Screen
Name (LABEL) : This just identifies your settings. The settings are automatically saved under this label
when you hit ‘OK’.
IP Address : Based on your network scenario and from where you’re accessing, enter the appropriate
IP address.
PORT : Enter the Port Number you assigned the DVR.
ID : Always enter ‘admin’
Password : This must match the password on the DVR. For simplicity, just use numbers.
ID : Always enter ‘admin’
Password : This must match the password on the DVR. For simplicity, just use numbers.
- It can add and save several IP Addresses for prompt multi-site monitoring.
PTZ TYPE : If using PTZ device or camera, select the protocol your PTZ camera is using from the list of
preconfigured protocols.
Circular Monitoring Interval : This indicates the speed of the channels sequence when the
SEQUENCE button is used from the main interface.
PTZ Baud Rate : Enter the Baud Rate of your PTZ camera.
Run in full screen mode : When checked, this will enable the program to re-adjust the interface to
Run in full screen mode : When checked, this will enable the program to re-adjust the interface to
completely fill your computer screen.
Set Path to Save Downloaded image : Determines the location and folder on your PC where the
downloaded video clips are stored. If you do not specify a valid
location, The viewer program will save all files in the default
location of C:\Program Files\DvrRemoteViewer4
location, The viewer program will save all files in the default
location of C:\Program Files\DvrRemoteViewer4