RGB Spectrum DGy 201x Benutzerhandbuch
T R A N S F E R R I N G R E C O R D I N G S
Transferring Recordings to the DGy
350-9047 v3.0.1
DGy Model 201x User’s Guide
82
. . . . .
To terminate the transfer of the current file, click
Abort
at the bottom of
the File Transfer screen. To terminate the whole session click on the
Abort All
button. A dialog box will request confirmation to terminate the
process or to complete the transfer process.
The status of files in the
Source Transfer list
is indicated by color:
Black Untransferred
file
Gray
Transferred file
Green
File currently being transferred
Red
Transfer aborted file
UPLOADING FILES
VIA FTP COMMAND
. . . . . . . . .
LINE
Before starting to upload files using a command line, the correct path of
all source clip files and the desired DGy destination folder must be
known.
all source clip files and the desired DGy destination folder must be
known.
Use the following steps to transfer clip files via command line from a PC
running Windows software to the DGy 201x.
running Windows software to the DGy 201x.
1.
From the Windows
START
menu, select
RUN
.
2.
In the
RUN
dialog box, type: cmd then press OK
3.
At the prompt, type: ftp <ipadddress of the DGy> then press
ENTER.
ENTER.
S
Example: ftp 192.168.1.200
4.
The DGy 201x will respond with a prompt requesting a user
name. Type: rgb (lower case) and press ENTER.
name. Type: rgb (lower case) and press ENTER.
5.
The DGy 201x will respond with a prompt requesting a
password.Type: spectrum (lower case) and press ENTER.
password.Type: spectrum (lower case) and press ENTER.
6.
When the login confirmation message is displayed, select the
binary file transfer mode by typing: bin and pressing ENTER.
binary file transfer mode by typing: bin and pressing ENTER.
7.
From the prompt, type: pwd and press ENTER. This will report
the DGy directory currently logged into (typically reported as
/rgb).
the DGy directory currently logged into (typically reported as
/rgb).
To copy files to the DGy 201x removable drive, type:
cd /remov and press ENTER.
To copy files to the DGy 201x fixed drive, type: cd /fixed and
press ENTER.
press ENTER.
To copy files to a specific folder on a drive, type:
cd /<drive name>/<folder_name> and press ENTER.
Important
All files associated with a clip must be uploaded.
Failure to transfer all clip files will result in errors
which will make the clip unusable.
Failure to transfer all clip files will result in errors
which will make the clip unusable.