Philips DVDR5330H Benutzerhandbuch

60

(These settings will be taken from the fi rst installation)

Press OK on the remote control to start the automatic TV channel 
search process and replace all previously stored analogue TV channels.  
This process may take several minutes.

In some cases, not all of the available TV channels may have been found 
and stored during fi rst installation. In this case, you will need to search for 
and store the missing or coded TV channels manually. Press OK to access 
the submenus.

 

{ Channel/Freq. }  

–  Select manual search based on channel 

allocation or frequency (Programme, FREQ, 
S. Channel).

 

  Note: S. Channel (Special channel) refers to 

specifi ed hyperband channels.

{ Entry/Search }  

–  Use the numeric keypad 0-9 to enter the 

channel number of the TV programme or 
start manual frequency search, then press OK 
to confi rm.

{ Program # } 

–  Use the numeric keypad 0-9 to enter the 

programme number for the channel to store 
(e.g., ‘01’) and press OK to confi rm.

{ Channel Name } 

–  Use the 

 keys to select the channel name 

and press OK to confi rm.

 Note: Move to { Channel Name } and press   

   to go to the next page 

or move to { Decoder } and press   

   back to the previous page.

{ Decoder }   

–  If the current TV channel is transmitted by 

coded TV signals that can only be viewed 
properly with a decoder which is connected 
to the EXT2 AUX-I/O socket, you need to 
activate the connected decoder. 
{ On }  –  Select this to allocate the connected 

decoder to this TV channel.

{ Off }  –  Turn off the decoder feature.

{ TV System } 

–  Set the TV system that produces the least 

distortion of picture and sound.  See last page  
“TV System Guide” for more information.

{ NICAM }  

–  NICAM is a digital sound transmission system. 

It can transmit either one stereo channel or 
two separate mono channels. 
{ On }  –  Select this to improve the sound 

transmission of the TV channel.

{ Off }  –  Select this if the reception is poor 

and the sound is distorted.

{ Fine Tuning } 

–  Select this to fi ne-tune the TV channel manually 

if the reception is poor. Use     keys to adjust 
the frequency and press OK to confi rm.

dvdr3300h_uk_eng_17233d.indd   60

dvdr3300h_uk_eng_17233d.indd   60

2005-10-19   10:41:31 AM

2005-10-19   10:41:31 AM