RGB Spectrum 201 Benutzerhandbuch

. . . . .

The DGy 201 recorder uses an internal real time clock to time stamp 
recordings. This clock can be set manually or can be synchronized 
automatically on a periodic basis to an external time reference. DGy 201 
supports the use of a Network Time Server (using the NTP protocol) or 
as an option may be connected to an IRIG-B time standard.

CurrentTIME

[RAW]

Displays currently computed local time of DGy 

internal clock with the date in mm/dd/yyyy format 

and time displayed in hh:mm:ss format. The time 

displayed is the current local time. If the time 

zone is changed the local time will also be 

changed.
To display the time as an unformatted data string 

use the optional RAW argument. For example if 

the current date and time are 3/02/2005 8:01:23, 

then using the RAW argument DGy will respond 

with the string 2005302080123.

RealTimeClockSET

<yyyymmddhhmmss>

Sets the internal DGy real time clock. This should 

only be used if no other method of timesetting is 

available.

TimeZone

<-12 ... +12>

Sets the timezone relative to UTC, For example 

Pacific Standard Time (PSRT) is -8 (8 hours 

behind UTC). DGy must be rebooted before the 

new time zone takes effect.

IRIGSTandarD

[DCLS | MOD1K]

The IRIGSTandard command is used to set the 

optional IRIG-B (format B123) input to accept 

either a DCLS (DC Level shift) or MOD1K 

(modulated 1kHz) reference signal.
Factory default: DCLS

NTSIP 

{Network Time Server 

IP address}

Sets the IP address of a Network Time Server. Up 

to three IP addresses can be set.
See also the commands: 

and