RGB Spectrum 201 Benutzerhandbuch

. . . . .

Both the digital and analog outputs of the DGy 201 are provided on the 
DVI output connector. Purpose built cables are available commercially to 
provide connections for digital interfaces or analog interfaces. The DGy 
201 is provided with DVI-15 pin adapters for use with analog devices, or 
alternatively an analog only output cable can be purchased that provides 
a “break out” capability to separate RGB connectors or sub miniature 
15-pin D connector.

. . . . . . . . . 

The optional composite video signal input use the industry standard 
75 

Ω BNC connector. 

The BNC connector is designed for use with coaxial cables. Coaxial 
cables are well suited for the transmission of high frequency signals over 
moderate distances. Coaxial cable is commonly available with a 
characteristic impedance of either 50 or 75 

Ω.   Video signals exclusively 

use 75 

Ω cable and connectors. For best signal quality it is important to 

use a high quality 75 

Ω coaxial cable. The use of 50 Ω cable will cause a 

signal mismatch which may result in visible artifacts on video images.

Ready made cables are available commercially or can be easily 
customized on site to suit your particular requirements.