RGB Spectrum 201 Benutzerhandbuch

. . . . .

Web Control Panel click on the DGy WCP button.

If you cannot connect to the WCP, use the following steps to determine 
the problem:

•

Check that the network Link and Activity LEDs on DGy 201’s 
front panel are indicating an active Ethernet link.

•

Determine that you have a working TCP/IP connection by using 
the “ping” utility to check the connection. The “ping” utility is 
typically provided as part of the networking tool included in your 
computer operating system.

•

If you are using a direct Ethernet connection between the DGy 
201 and control PC be sure that the PC has a valid IP address 
and that you are connecting via an Ethernet crossover cable. 

With a direct connection a DHCP server is not available and the 
PC will have to be set with a manually set static IP address 
compatible with the DGy 201 address.

•

Check that you have entered the correct IP address into the 
browser address line. If you are unsure about DGy 201’s IP 
address, use the serial port to determine the current IP address. 
In Chapter 6, refer to the 

 command for more 

information.

. . . . . . . . . 

After you have selected the DGy 201 WCP option from the DGy 201 
Application Suite page, the WCP Configuration Screen will appear