Samsung SVR-440 Benutzerhandbuch

recording is indicated.

. RECORD STATUS [ON/OFF]:

With Record Status [ON], the recording status “S” is displayed on

the corner of the screen during recording.

. TITLE DISPLAY [ON/OFF]:

With Titles Display [ON], the titles of [CH1

4] set on the Channel

Title submenu by uses are displayed on the live screens.

. EVENT DISPLAY [ON/OFF]: With Event Display [ON], the event information is displayed when

event is occurred.

. OSD CONTRAST : Set the contrast for Menu OSD. Number of % is higher, the OSD is Darker.

4.5 RECORD SETUP

Press the

button and select the Tab using the Left/Right button. Then, the submenu related to

recording appears as illustrated below. Press button and select the submenu by using the

Left/Right button. Next, press

button

again, and you can select setup items using the Up/Down

button.

4.5.1 REPEAT RECORD

Monitoring screens can be recorded on the HDD and the storage capacities vary on HDD types

installed on the unit.

. REPEAT RECORD [ON/OFF]:

Set whether to repeat recording.

. ON:

If no storage spaces are left on the HDD, recording is continued by overwriting the oldest

data.

. OFF:

If no storage spaces are left on the HDD, recording is stopped.

. WARNING MESSAGE:

When the remaining capacity of the HDD reaches the predefined

percentage, a warning message is displayed to users. The warning level can be set from

1 to 10%, 5

10% in general.

WARNING BEEP:

When the remaining capacity of the HDD reaches the predefined percentage, a

warning beep is activated.