Samsung SVR-950 Benutzerhandbuch

 

4 

9  Press (PAN) / (TILT) / (ZOOM) and use the mouse and jog/shuttle to take the screen to the 

desired PTZ state. 

9  Use PRESET located below PTZ and setup the value with the mouse (1~255). 

1. If PTZ (P-Set) is displayed in the upper part of the screen, Channel 1∼16 
(SVR-950: channel1~9) displays the preset number to setup (1~255) rather 
than the corresponding channel. 
 
2. Preset may be setup by pressing the ‘ENTER’ key, located in the front of DVR, 
or the mouse button after moving the cursor to      . 

 

9  Select a desired channel from channel 1~16(SVR-950: channel 1~9) and select the entire 

screen mode. 

9  Press PTZ to select the PTZ mode (PTZ is displayed in the upper right corner of  the screen.) 

9  Use the mouse on PRESET, located below PTZ on the screen, to setup the value (1~255). 

9  If  the desired button between Channel 1~16(SVR-950: channel 1~9) is pressed, the cursor is 

moved to the          button and the ENTER key located on the front of  DVR is pressed, the 
camera operates with preset values setup in advance. 

 

9  After pressing the PTZ button from the single screen, if  either the ENTER key in the front 

of  the DVR or the mouse button is pressed after moving the cursor to ……, OSD for the 
speed dome camera and the following message will be displayed: ‘PTZ OSD’. 

9  OSD cursor for the speed dome camera may be moved up/down and left/right by using 

▲▼

 keys in the front of  the DVR.

◀▶

 

9  Changes in OSD for the speed dome camera may be setup or cancelled by using ENTER and 

ESC keys in the front of  the DVR. 

9  OSD function for the speed dome camera can be terminated by pressing the PTZ button in 

the front of  the DVR. 

 

 

S

M

o