Samsung SIR-S60W Benutzerhandbuch
13
Make sure the power cords for your Multi-Satellite Receiver, TV, and VCR are
unplugged before connecting any of the cables.
unplugged before connecting any of the cables.
Connect your satellite dish antenna to the SATELLITE IN jack on the back of
the Multi-Satellite Receiver with RG-6 coaxial cable running from the dish.
the Multi-Satellite Receiver with RG-6 coaxial cable running from the dish.
Connect your cable or off-air antenna to the IN FROM ANTENNA jack on the
back of the Multi-Satellite Receiver with the coaxial cable running from the
cable system or installed off-air antenna.
back of the Multi-Satellite Receiver with the coaxial cable running from the
cable system or installed off-air antenna.
Connect the Multi-Satellite Receiver TEL LINE jack to a telephone wall jack
with the included telephone cord.
with the included telephone cord.
Connect the Multi-Satellite Receiver TV OUT jack to the IN FROM ANT
terminal on the VCR with the included short coaxial cable.
terminal on the VCR with the included short coaxial cable.
Connect the VCR OUT TO TV jack to the IN terminal on the TV with a short
coaxial cable (not included).
coaxial cable (not included).
Connect the red and white audio cables from the R-Audio-L jacks on the
back of the Multi-Satellite Receiver to the AUDIO jacks on the TV. Please be
sure to match the colors on the jacks with the same colors on the included
audio cables.
back of the Multi-Satellite Receiver to the AUDIO jacks on the TV. Please be
sure to match the colors on the jacks with the same colors on the included
audio cables.
Connect the yellow video cable between the VIDEO jack on the back of the
Multi-Satellite Receiver to the VIDEO jack on the TV.
Multi-Satellite Receiver to the VIDEO jack on the TV.
Connect the power cords for your Multi-Satellite Receiver, TV, and VCR to
wall outlets.
wall outlets.
6
7
8
9
1
2
3
4
5
Advanced Connection Set Up Steps:
To watch DIRECTV programming
Set your TV to the appropriate A/V mode (TV input selection).
If you have difficulty setting this A/V mode (TV input selection), refer to your TV
owner’s manual.
If you have difficulty setting this A/V mode (TV input selection), refer to your TV
owner’s manual.
To record DIRECTV programming
Tune your Multi-Satellite Receiver to the desired channel and set your VCR to record
on channel 3 or 4, depending on your setting for the default TV output channel.
To view VCR recordings
Tune your TV to the default TV output channel (channel 3 or 4) and press play on
your VCR.
Setting Up and Connecting