Samsung SVR-960C Benutzerhandbuch

from and select "Save As". To confirm the saving operation, go to the directory the image is 

saved to and double-click the image. 

 

 

While monitoring, right-clicking on a channel supporting PTZ and selecting "PTZ" will allow the 

user to manipulate the camera position. 

 

To control PTZ, right-click the channel to manipulate and select "PTZ". A white cross will appear 

at the center of the screen. Click on the screen to manipulate camera position. Clicking left or 

right of the cross will pan the camera and above or below will tilt it. Clicking further from the 

camera will cause the camera to change its position faster.   

 

Placing the cursor at the left and right sides of the screen will reveal the zoom and focus slide 

bars. A camera unit supporting Area Zoom In will also support the Zoom Zero button. Use the 

slide bar to the left to zoom in and out and the right slide bar to control focus. 

 

If a preset position is configured, right-click during PTZ mode and select the desired preset 

position from "Goto Preset". The camera will move to the preset position. Preset positions must 

have been configured beforehand. 

 

If a preset position has been configured, the pop-up menu will also contain "Auxiliary". Selecting 

the item will perform the assigned action.