Samsung SVR-1640 Benutzerhandbuch

4.10 PTZ

From the selected LIVE entire screen SINGLE mode, press the PTZ button to adjust camera Pan, Tilt,

Zoom or view the screen in preset (PTZ value for camera setup in advance) state. There are no PTZ related
buttons on the remote controller.

4.10.1 PTZ adjustment

9 After pressing the PTZ button from the single screen, put the cursor on the button and

adjust using the shuttle.

9 To adjust camera TILT, after pressing the PTZ button from the single screen, put the cursor

on the button and adjust using the shuttle.

9 To adjust camera ZOOM, after pressing the PTZ button from the single screen, put the

cursor on the button and adjust using the shuttle.

9 To adjust camera focus, put the cursor on the button and adjust using the shuttle.

Jog dial can only cause movement in 1x speed. By increasing the shuttle ring
rotation angle, movement in 2x, 4x, 8x speed is possible for the shuttle ring.

9 After adjusting, if the button is pressed with the mouse or if the ENTER button, located

on the front of DVR, is pressed after the A button is selected, focus is adjusted automatically.

9 To exit the PTZ mode, press the mouse right button or the ESC key.

PTZ mode can only be used in LIVE screen and cannot be setup in MULTI mode.
It must be setup as SINGLE mode in the LIVE screen.

4.10.2 Preset setup

9 Select a desired channel from channel 1~16(SVR-950: channel 1~9) in the LIVE screen and

select the entire screen mode.

9 Press PTZ to select the PTZ mode (PTZ is displayed in the upper right corner of the screen.)