Samsung DVR-8TH Benutzerhandbuch

 

User’s Manual

 

 

DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10

 

63

This item is used for updating the DVR-4TH/ 8TH/ 16TH series unit software 
by local device. The menu is displayed as follows. 
 

Software Upgrade via Local Device 

Upgrade Version 
xxxx-xxxx-xxxx-xxxx  

Select 

No 

 

Connect a USB drive that contains the upgrade software to the unit; the 
upgrade files that are available will then be listed in the menu. To update the 
system, select a file and use UP / DOWN keys to choose <Yes>. Press 
ENTER to confirm the selection and start the upgrade process. The 
DVR-4TH/ 8TH/ 16TH series unit uploads the software, updates the system 
files, and reboots automatically. 
 
The upgrade process may take several minutes to complete. After rebooting 
the unit, please check the software version again. 
 

NOTE: If you want to upgrade your unit with a USB ThumbDrive

®

 

contains the newest software, make sure the software you want to use 

to update the unit should be fold into a folder named “upd_200s”, 
otherwise, the unit cannot recognize it. 

 

NOTE: Power interruption cannot occur during the software upgrade 
process. Ensure that no power interruption can happen until the unit is 

completely rebooted. 

 

NOTE: Do not remove the external USB ThumbDrive

®

/DVD+RW 

before the unit has completely shut down (hard drive and fan are off). 

Removing the external USB ThumbDrive

®

/DVD+RW before shut down 

can cause the system to update improperly. 

 

This item is used to upgrade the unit’s software via the internet. Select one of 
the listed software versions and choose <Yes>. The DVR-4TH/ 8TH/ 16TH 
series unit uploads the software, updates the system files and reboots 
automatically.