Samsung DVR-4TH Benutzerhandbuch

 

User’s Manual

 

 

DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10

 

113

Select from the options: <A Only> indicates “Alarm Out A”, <B Only> indicates 
“Alarm Out B”, <A+B> indicates “A and B Alarm Out” and <None> indicates 
“No Alarm Out”. The default setting is <None>. 
 

If an alarm is triggered while Digital Deterrent is enabled, a pre-recorded 
audio warning will be sent to the speaker installed nearby the location where 
the alarm was triggered. For instance, if the alarm of Channel 2 is triggered 
and there is a speaker installed to the DVR nearby, the speaker will play the 
audio warning. 
 
The available options are <OFF>, <Default>, and <Sound_1> ~ <Sound_50>. 
Select <OFF> to disable this function. Selecting <Default> will apply audio 
warning pre-stored in the DVR. <Sound_1> ~ <Sound_50> allows the user to 
apply user-defined audio warning from 1 to 50. Note that the user-defined 
audio has to be set before choosing <Sound_1> ~ <Sound_50> option, or the 
following message will be shown. 
 

Warning!! 

No user-defined file is in the DVR! 

Please create customized file first! 

The steps are similar to ezBurn 

Note: Cannot exceed 10 seconds 

Press any key to return 

 
Only sound files 1 to 16 can be recorded via the following steps. The other 
way to define sound files 1 to 50 is to import manually. Refer to the section 

 for more details about importing sound files. 

 

•  Use any camera to record the preferred audio. Please note that <Audio 

Recording> under <Record Setting> menu should be set to <ON>. 

•  Press SEARCH and play the normal video of the recorded date and time. 
•  View full screen of the channel that the preferred audio was recorded. 
•  Press COPY at the point you want to set as the start point of the audio. 

The playback continues. 

•  Press COPY again at the point you want to set the end point of the audio. 

Now, the “ezBurn Confirmation” window displays as follows. The 
information shown on the window is “read only”.