Samsung DVR-4TH Benutzerhandbuch

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

36 

This function is used to set the Day/ Night/ Weekend PPS (Picture per 
Second) and Quality for each channel. The Preset Configuration must be set 
to <OFF> for accessing these schedules. The menu displays as follows: 
(Record Mode: 352×240@240PPS in NTSC/ 352×288@200PPS in PAL).   
 

Per Camera Config 

Cameral Select 
 
Normal PPS 
Normal Qlty 
Event Max PPS 
Event Qlty 
Event Act 

7.5

Best

30

Best

Both

7.5

Best

30

Best

Both

CH1 

7.5 

Best 

 30 

Best 

Both 

 

• First, select a Camera to set its record configuration. The image and 

record settings from the selected camera will be displayed on the screen. 

•  Move the cursor using the Direction keys and press ENTER to select an 

item. 

•  Change the value using UP/ DOWN keys. 
•  Press ENTER to confirm the settings or ESC to abort. 
•  Press ESC to return to Record Setup menu. 

 
Please note that the total normal pps for all channels cannot exceed 240 
NTSC (352×240@240PPS)/ 200 PAL (352×288@200PPS). To increase one 
channel’s pps, you may have to reduce other’s first. Event pps is not 
restricted to this rule, since a smart event schedule will correct the total pps 
automatically.. 

 

If you want your DVR unit to start recording only under the alarm is triggered, 
follow the steps: 

•  Enter the OSD setup menu with a proper account. 
•  In the OSD setup menu, select <Record Setup> menu. Move the cursor to 

the item <Preset Config>, and select <Event only>. 

 

Refer to section Preset Record Configuration for more detailed information.