Samsung NETWORK DIGITAL VIDEO RECORDER Benutzerhandbuch

 

6

detection is triggered.     
Note: PAL: (1~4P/6P/8P/12P/25P) NTSC=15P, PAL=12P on default. 

f

Use ◄ or ► button to set the dwell time for alarm recording when external alarm or motion 
detection is triggered. 
When external alarm is triggered and within the dwell period: 

- 

the screen will be switched into 4 format. 

- The 

corresponding 

camera 

will be marked ID “EXT” 

g

 Use 

◄ or ► button to select the BEST, HIGH, MEDIUM or LOW setting so there is a total 

of four levels of recording quality that can be chosen from. The higher the quality, the 
higher the amount of storage will be consumed. Thus, this setting should be carefully 
chosen as it will affect the usage of hard disk storage. 
A table of relationship between quality, record speed and hard disks is attached for 
Reference. 

h

You can decide to include or exclude motion events by turning on or turning off in this 
option. The default setting is off. 

i

 

Exit from the RECORD SETUP menu 

ˇ 
O O O O O O O O O O O O O O O O O O O O O O O O 
：    ：    ：    ：    ：    ：    ： 

  ：    ： 

PRESS (UP,DOWN) TO SELECT 
PRESS (ENTER) TO SET, (MENU) TO EXIT   

 
Press the MENU button to go into the 
main menu. 
 
Use the ◄ or ► button to select items. 
 
Press the ▲ or ▼ button to confirm the 
selection. 
 
Press MENU to escape to exit the set 
up mode. 
 

1

There are 24 circles in the schedule table, which represent 24 hours. 
Every circles has 3 options to select: 
O : represents “fully record” 
X : represents “no record” 
A : represents “alarm record” 
Use the ◄ or ►button to select items. 
Press ▲ or ▼ button to select the O/ X / A (Fully / No / Alarm Record). 

Press ◄ or ► key on “EVENT LIST” than windows will appear as below:   

 

Use “▲ or ▼“ key to select event which needs to be played，location of “ > “ symbol will move up