Samsung SDS-P5102/P5122 Benutzerhandbuch
English
_13
!
over
view
Changing the remote Control Id
1. Press the [Id] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the system [Id] button.
3. When ID input is done, press the system [Id] button again to check the setting.
3. When ID input is done, press the system [Id] button again to check the setting.
M
`
If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 50)