Samsung SVR-470 Benutzerhandbuch
7.2. Event Setup
Scheduled Recording can be set up to 24 hours per day. Using the
buttons, move to an hour
block, and then press ENT to select a recording mode.
S : Sensor Recording
‐ : Recording Disabled
i g
C : Continuous (Normal) Record n
n Recording
M : Motion Detectio
T : Text Recording
Image Quality: Select High, Standard, or Low to adjust the image quality.
Recording Frames: Select the number of images (frames) that can be recorded per second. At
the 704x480 size, a maximum of 30 images can be selected, and a maximum of 120 images at
the 352x240 size.
the 704x480 size, a maximum of 30 images can be selected, and a maximum of 120 images at
the 352x240 size.
Pre‐Event Recording: Select to start recording prior to an event. Selecting [Yes] commands the
DVR to start recording 3 seconds prior to an event, and [No] disables this option.
DVR to start recording 3 seconds prior to an event, and [No] disables this option.
Post‐Event Recording Duration: Select a recording duration after an event; from 1 to 20
seconds.
seconds.
Audio: Select "Yes" or "No" to record audio.
7.2. Event Setup
Set the event menus of a DVR such as Motion Detection, Sensor, and Alarm. Press the MENU button,
and then select a tab using the left and right buttons. The sub menus appear as shown in the picture
below. Press the ENTER button, and select a sub menu using the left and right buttons. Press ENTER
again, and then change the settings of the menu by pressing the left and right buttons.
7.2.1. Event Setup
① EVENT BEEP: Select ON or OFF to play a beep when an event occurs.
② EVENT AUTO SEQ: Select ON or OFF to display event screens in full screen mode.
45