Samsung SVR-1670 Benutzerhandbuch
Digital Video Recorder User Guide
46
Digital Video Recorder User Guide
47
Chapter 5. Quick Setup
3. Once you have completed the Record setup, notice the Rec light on the DVR’s front panel
flickers and the symbol S displays to show that all channels are recording as scheduled.
Setting the system time is very important for the validity of your recorded data. The date and time
you set governs all schedules your subsequently configure for the DVR. The date and time appear
on all monitor displays and on all timestamps for events.
5. 3. Setting the Date and Time
Plan carefully if you need to set the date and time!
Back up video before changing the time.
Do not change time setting while recording. Doing so can compromise the date stamping of
the recording.
Back up video before changing the time.
Do not change time setting while recording. Doing so can compromise the date stamping of
the recording.
To set the date and time, follow these steps :
1. Select the Time option from the Quick Set menu.
2. Enter the time zone for the camera location. (The default setting is UTC 00:00 Dublin.)
1. Select the Time option from the Quick Set menu.
2. Enter the time zone for the camera location. (The default setting is UTC 00:00 Dublin.)
3. Set Daylight Savings to on or off. (The Daylight Savings option is only available if daylight
saving time is used in the time zone you selected.)
4. Select the Date Format you prefer.
- Formats are YYYY/MM/DD or MM/DD/YYYY or DD/MM/YYYY.
5. Set the Time by entering data in each of the Date fields and in the Hour/Minutes/ Seconds
saving time is used in the time zone you selected.)
4. Select the Date Format you prefer.
- Formats are YYYY/MM/DD or MM/DD/YYYY or DD/MM/YYYY.
5. Set the Time by entering data in each of the Date fields and in the Hour/Minutes/ Seconds
fields.
6. Click the Apply Date/Time button to confirm and save the settings.
· When the confirmation message appears, select Yes if you want to confirm your changes to
· When the confirmation message appears, select Yes if you want to confirm your changes to
the date/time setting.
Figure 5.3.1 System Time Submenu on Quick Setup
Chapter 6. Using the System Setup Menu
This chapter provides information about the features on the OSD’s System Setup menu, from
which you setup various system-wide controls for the DVR
which you setup various system-wide controls for the DVR
The information is presented in these sections :
▶ 6.1 Using theSystem Setup Options
▶ 6.2 Using the Disk Options on the System Setup Menu.
▶ 6.3 Working with Passwords and Permissions.
▶ 6.2 Using the Disk Options on the System Setup Menu.
▶ 6.3 Working with Passwords and Permissions.
You access the System Setup menu by clicking its tab on the OSD. This section explains its four
submenus, their options and settings.
Figure 6.1.1 System submenu on the System Setup Menu
Option
Settings
Language
Select a language.
Key Buzzer
Select On if you want a buzzer to sound when you use the buttons on the front panel.
Default
Select if you want to restore the factory default settings. At the warning message,
select “Yes” again to restore the settings.
select “Yes” again to restore the settings.
Load/Save
Configuration
Configuration
Select Save if you want to save settings to USB storage.
Select Load if you want to load stored settings from USB storage.
Select Load if you want to load stored settings from USB storage.
Firmware Update
Select to update firmware from USB storage and connect it to the SVR-1670
DVR Alias
Set a SVR-1670 alias; that is, give the SVR-1670 its own name such as “Main
Floor,” “Headquarters,” or “Fred.”
Floor,” “Headquarters,” or “Fred.”
System Log
Displays a log, by time, of various events within the system
Time
Set the system time. You can set the time in two places: here and on the Quick
Start menu.
Start menu.
6. 1 Using the System Setup Options