Samsung SVR-1670 Benutzerhandbuch
Digital Video Recorder User Guide
64
Digital Video Recorder User Guide
65
Chapter 7. Communication To/From the DVR
Setting Serial Ports
Setting PTZ Options
To set the serial port, first select the COM (communication port) :
∙ COM1 and COM3 are fixed to RS-232C
∙ COM2 uses RS-422/RS485
∙ COM4 uses RS-485.
1. Access the Serial submenu (to the right of the COM selection).
2. For the Devise option, select a connected device.
3. Set the other selections— Baud rate, the Parity, Stop Bit and Data Bit—as appropriate for the
∙ COM1 and COM3 are fixed to RS-232C
∙ COM2 uses RS-422/RS485
∙ COM4 uses RS-485.
1. Access the Serial submenu (to the right of the COM selection).
2. For the Devise option, select a connected device.
3. Set the other selections— Baud rate, the Parity, Stop Bit and Data Bit—as appropriate for the
device you’ve chosen.
To set PTZ options for your cameras, first specify the camera’s channel, 1 through 16.
1. Access the PTZ submenu (to the right of the PTZ channel selection).
2. Set PTZ Home to On if you want the camera to return to home if PTZ is not controlled for a
1. Access the PTZ submenu (to the right of the PTZ channel selection).
2. Set PTZ Home to On if you want the camera to return to home if PTZ is not controlled for a
specified period of time. Otherwise, set to Off.
3. If PTZ Home is set to On, set the PTZ Idle Time. This is the duration of time before which the
camera returns to home. For example, if you set this to 5 seconds, PTZ returns to Home when
PTZ is not controlled for more than 5 seconds.
PTZ is not controlled for more than 5 seconds.
4. Set the PTZ Port by selecting the port to which the camera channel is connected.
5. Select the Camera ID of the connected PTZ camera.
5. Select the Camera ID of the connected PTZ camera.
You can set up the SVR-1670 for streaming data. This section describes how to set up streaming
options.
• RTSP/TCP : Convenient to use in conjunction with a simple firewall that allows RTSP transmission.
• RTP/UDP : Effective when the latest video data from a camera must be transferred, even if it causes
• RTSP/TCP : Convenient to use in conjunction with a simple firewall that allows RTSP transmission.
• RTP/UDP : Effective when the latest video data from a camera must be transferred, even if it causes
video loss.
• RTSP Standard Port (554) : Select to use the RTSP standard port (554).
You can selectively block or allow IPs to access the SVR-1670.
7. 5 Setting Up Streaming Options
7. 6 Setting Up IP Filters
Option
Setting
RTSP/TCP
Select to use RTSP/TCP.
RTP/UDP
Select to use RTP/UDP.
RTSP Standard
Port(554)
Port(554)
Select to use the RTSP standard port.
Option
Setting
Use
Select to use the IP filter.
Default Policy
Select to block or allow IPs using the default policy.
IP Range
Select a range of IPs to block or allow; Check the checkbox, and then enter the IPs.