Samsung DVD-VR355 Benutzerhandbuch

English - 62

The clock (Setup – Clock Set) must be set before proceeding with a 
timer recording. (See page 29)
1.  Press the OPEN/CLOSE button, and place a recordable disc on the 

disc tray(or load a tape into the VCR).

2.  Press the OPEN/CLOSE button to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

3.  With the unit in Stop mode, press the MENU button.
4.  Press the ▲▼ buttons to select Timer Rec., then press the ENTER or 

► button.

5.  Press the ▲▼ buttons to select Timer Record, then press the ENTER 

or ► button.
You can go to the Timer recording screen directly by pressing the 
TIMER REC button.
The Timer Recording screen is displayed.

6.  Fill in the items using the ▲▼◄ ► buttons.

◄► : Moves to the previous/next item, 
▲▼or 0~9 : To set or change items in the Scheduled Record List 
Menu.
• To : Select the media to record (DVD or VCR).

  •  Source :  The video input source (AV1 or AV2) or the broadcasting 

channel you want to make a timer recording from.

  •  Date : Date that the timer recording starts

-  There are three options when setting the date.

see below:

       To make a recording on a specific date, press the ▲▼ or number 

buttons until the date you want appears.

    To make a recording at the same time every day (Mon-Fri), press the 

▲▼ buttons until Mon-Fri appears:

    To make a recording on a specific day of the week(Sun’s-Sat’s), 

press the ▲▼ buttons until Sun’s….Sat’s appears:

  • Start/End Time: Start and end time of the timer recording.

  AUTO :  Select when you want the video quality adjusted automatically.

In AUTO mode, the most suitable record mode is chosen 
according to the remaining time on the disc and length of the 
timer recording. You can select only one mode from XP, SP, 
LP and EP for timer recording.

  XP (high quality) :  Select when audio and video qualities are important. 

(Approx. 1 hour)

  SP (standard quality) :  Select to record in standard quality.

(Approx. 2 hours)

  LP (low quality) :  Select when a long recording time is required. 

(Approx. 4 hours)

  EP (extended mode) :  Select when a longer recording time is required. 

(Approx.6 hours at 1.2 Mbps or Approx.8 hours 
at 0.8 Mbps )

 When you are recording in EP mode on a DVD-RW(V)/-R disc, it 
may not record for the full 6 or 8 hours because the unit uses the 
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a program with a lot of action, it uses a 
higher bit rate which in turn consumes more disc memory. 

■

01343A-VR355-XAC-ENG.indb   62

01343A-VR355-XAC-ENG.indb   62

2007-03-23   오후 6:51:44

2007-03-23   오후 6:51:44