Samsung DVR-16TH Benutzerhandbuch

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

26 

There is an empty cartridge positioned on the front panel where users can 
install a swappable HDD. There are two possible situations after a HDD is 
installed into the unit. 

•  If a brand new HDD is installed, the unit will automatically format it and 

add it into the database. 

•  If a used HDD that has a different data format is installed, the screen will 

show “1 disk(s) with wrong data format! Please format then add to the 
database manually”. Please follow the steps described below: 

-  Enter the OSD setup menu using account with appropriate privilege 

and access <Database Setup>. 

-   Access <External Disks>. 
-   Find the HDD that was just installed, and select <Format> to format it. 
-   After the HDD is formatted, select <Add> to add it into the database. 

 

SV35.2 

160G / 320G 

Barracuda ES.2 

500G 

Barracuda 7200.11   

1000G 

DeskStar 320G 

DiamondMax 22 

500G 

WD AV 

160G / 320G / 500G

 

If the DVR-4TH/ 8TH/ 16TH series unit must be shutdown for any reason, 
always remember to follow proper shutdown and power on procedures in 
order to avoid damage to the unit. 
 
To Power On the Unit 
First check if the type of power source available is compatible before plugging 
into the unit. Then turn on the unit using the power switch on the rear panel. 
 
The system checking information and color bar will be shown on the monitor. 
It will disappear when the unit has been properly powered on.