Samsung DVR-16TH Benutzerhandbuch

User’s Manual

DVR-4TH/8TH/16TH Series

SPECO TECHNOLOGIES 07/10

Client IP
This item determines the remote PC’s IP address for connecting with the
DVR-4TH/ 8TH/ 16TH series unit. To set the Client IP, follow these steps:

• Select <Client IP> and use LEFT/ RIGHT to move the cursor over the IP,

and stop where you want to make the change.

•  Press ENTER, then use UP/ DOWN to change the value.
•  When done, press ENTER again to exit.
•  Repeat the procedure until the IP is set completely.

Dial-in Idle Time
This item indicates the longest amount of time that the modem connection
remains active if there is no acknowledgement from the remote pc. The value
can be set from 0 min to 600 min.

Dial-in Max Time
The item indicates the longest amount of time that the connection via modem
remains active. The value can be set from 0 min to 600 min.

Dial-out Setup

The Dial-out function enables the user to establish dial-up modem
communication to and from the DVR-4TH/ 8TH/ 16TH series unit for remote
notification use. The user can connect one modem to the DVR-4TH/ 8TH/
16TH series unit. For more information for dial-up setting on PC, see
appendix Dial-up Connections via Modem.

NOTE: The Dial-out Service is not available if there is no modem
connected to the unit.

In the Network Setup menu, select <Dial-out Setup> and press ENTER to
enter the Dial-out menu. The menu displays as follows.

Dial-out Setup

Dial-out DHCP
Dial-out IP
Dial-out Netmask
Dial-out Gateway
Dial-out DNS
Phone Number
Dial-out Account
Dial-out Password
Dial-out Idle Time
Dial-out Max Time
Connect

OFF

0. 0. 0. 0

0. 0.  0. 0
0. 0.  0. 0
0. 0.  0. 0

0 Min