Linksys SPA 900 Benutzerhandbuch
5-41
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Proxy and Registration
Note
Many of the following parameters do not apply to the SPA901.
MOH Server
User ID or URL of the auto-answering streaming audio server. When only a user ID is
specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the
MOH Server is not specified.
specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the
MOH Server is not specified.
Defaults to imusic when used with a SPA9000 IP PBX.
Message Waiting
Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is
toggled by a message from the SIP proxy to indicate if a message is waiting. You can
manually modify it to clear or set the flag in the Ext 1-6 tab.
toggled by a message from the SIP proxy to indicate if a message is waiting. You can
manually modify it to clear or set the flag in the Ext 1-6 tab.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long-term memory and survives after reboot or power cycle.
stored in long-term memory and survives after reboot or power cycle.
Defaults to No.
Auth Page
Specifies whether to authenticate the invite before auto answering a page.
Defaults to No.
Default Ring
Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Choose from No
Ring, 1 through 10, User 1, or User 2.
Ring, 1 through 10, User 1, or User 2.
Defaults to 1.
Auth Page Realm
Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set
to Yes. This parameter accepts alphanumeric characters.
to Yes. This parameter accepts alphanumeric characters.
Defaults to blank.
Conference Bridge URL
This is the URL used to join into a conference call, generally in the form of the word
“conference” or “user@IPaddress:port”.
“conference” or “user@IPaddress:port”.
Defaults to blank.
Auth Page Password
Identifies the password used when the Auth Page parameter is set to Yes. This parameter
accepts alphanumeric characters.
accepts alphanumeric characters.
Defaults to blank.
Mailbox ID
Identifies the voicemail box number/ID for the phone.
Defaults to blank.
Voice Mail Server
Identifies the SpecVM server for the phone, generally the IP address and port number of
the VM server.
the VM server.
State Agent
Reserved feature.
CFWD Notify Serv
Specifies whether to enable a SIP-B feature regarding the sending of a Notify to the phone
when a call is forwarded elsewhere.
when a call is forwarded elsewhere.
Defaults to No.
CFWD Notifier
Typically, this field is configured with the SIP proxy information.