Linksys SPA 900 Benutzerhandbuch

On a SPA901rt of the Linksys IP phone. 

Press **** (quickly press the star key four times).

Wait until you hear “Linksys configuration menu.”

You cannot access the IVR from a phone that is currently connected to a call. 

Refer to 

 to identify the option required. 

Enter the required option followed by the # (pound) key.

To enter a period, use the star key (*). 

When entering a value, such as an IP address, to exit without entering any changes, press the * (star) key 
twice within half a second. Otherwise, the * is treated as a decimal point.

After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your 
selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new 
setting, press 3. To cancel your entry and return to the main menu, press * (star).

For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press 
the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP 
address or press the * (star) key to cancel your entry and return to the main menu.

If the menu is inactive for more than one minute, the Linksys IP phone times out. You need to re-enter 
the menu by pressing ****.

To exit the menu, hang up the telephone.

The settings you have saved take effect after you hang up the telephone. The Linksys IP phone may reboot 
at this time.

 summarizes the options provided by the IVR.

Enter IVR Menu

* * * *

None

Ignore SIT or other tones until you hear, 
“Linksys configuration menu. Enter 
option followed by the pound key or 
hang-up to exit.”

Exit IVR Menu

3948

None

Check  DHCP

100

None

IVR announces whether DHCP is enabled 
or disabled.

Enable/Disable DHCP

101

Enter 1 to enable

Enter 0 to disable

Requires password

Check WAN IP Address

110

None

IVR announces the current IP address of 
the WAN port.