ZyXEL Communications EMG5324-D10A Benutzerhandbuch

Chapter 6 Wireless

EMG5324-D10A User’s Guide

In order to configure and enable WEP encryption, click Network Settings > Wireless to display 
the General screen. Select Basic as the security level. Then select Static WEP or Shared WEP 
from the Security Mode list.

Wireless > General: Basic (Static WEP/Shared WEP) 

The following table describes the labels in this screen.

Wireless > General: Basic (Static WEP/Shared WEP)

Security Mode

Choose Static WEP or Shared WEP from the drop-down list box.

•

Select Static WEP to have the Device allow association with wireless clients that use 

Open System mode. Data transfer is encrypted as long as the wireless client has the 

correct WEP key for encryption. The Device authenticates wireless clients using Shared 

Key mode that have the correct WEP key.

•

Select Shared WEP to have the Device authenticate only those wireless clients that use 

Shared Key mode and have the correct WEP key. 

WEP Key

Enter a WEP key that will be used to encrypt data. Both the Device and the wireless stations 
must use the same WEP key for data transmission.

If you want to manually set the WEP key, enter any 5 or 13 characters (ASCII string) or 10 
or 26 hexadecimal characters ("0-9", "A-F") for a 64-bit or 128-bit WEP key respectively.