Siemens 20 Benutzerhandbuch

 A31003-O1010-M100-9-76A9, 05/05/2008

HiPath 8000 - OpenStage Family, Administration Manual

  

  

  

administration.fm

The generation of QoS (Quality of Service) reports which are sent to a QCU server (see Sec-
tion 3.3.8, “SNMP”) is configured here.

•

Report mode: Sets the conditions for generating a QoS report.

 

Value range:

•

"OFF": No reports are generated.

•

"EOS Threshold exceeded": Default value. A report is created if a) a telephone con-
versation longer than the Minimum session length has just ended, and b) a threshold 
value has been exceeded during the conversation.

•

"EOR Threshold exceeded": A report is created if a) the report interval has just 
passed, and b) a threshold value has been exceeded during the observation interval.

•

"EOS (End of Session)": A report is created if a telephone conversation longer than 
the Minimum session length has just ended.

•

"EOR (End of Report Interval)": A report is created if the report interval has just 
passed.

•

Report interval (seconds): Time interval between the periodical observations.

 

Default: 60.

•

Observation interval (seconds): During this time interval, the traffic is observed.

 

Value: 10.

•

Minimum session length (100 millisecond units): When the Report mode is set to "EOS 
Threshold exceeded" or "EOS (End of Session)", a report can be created only if the dura-
tion of the conversation exceeds this value.

 

Default: 20.

•

Maximum jitter (milliseconds): When the jitter exceeds this value, a report is generated.

 

Default: 20.

•

Average round trip delay (milliseconds): When the average round trip time exceeds this 
value, a report is generated.

 

Default: 100.

>

For details about the functionality, please refer to the release notes.