Siemens 20 Benutzerhandbuch

administration.fm

A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual

  

  

  

This chapter describes the configuration of every parameter available on the OpenStage 
phones. For access via the local phone menu, see the following; for access using the web in-
terface, please refer to Section 2.3.1, “Access the Web Interface (WBM)”.

Access the Administration Menu
OpenStage 60/80:
Press the 

v

 key to activate the administration menu (the 

v

 key toggles between the user’s 

configuration menu and the administration menu). 
OpenStage 60/80 V1R3.x upwards:
The 

v

 key toggles between the Settings menu, the Applications menu, and the applica-

tions currently running. Press the 

v

 key repeatedly until the "Settings" tab is active. (The 

v

 key toggles between the Settings menu, the Applications menu, and the applications 

currently running.) 
OpenStage 20/40:
Press the keys 

D

, 

l

, and 

i 

consecutively to select the administration menu. 

Enter Password
When the Admin menu is active, you will be prompted to enter the administrator password. 
The default admin password is "123456". It is recommended to change the password (see 
Section 3.14, “Password”) after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode. For changing the mode, press the # key 
once or repeatedly, depending on the desired character. The # key cycles around the input 
modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.

>

The data entered in input fields is parsed and controlled by the phone. Thus, data is 
accepted only if it complies to the value range.