Toshiba DKT2510-FSD Benutzerhandbuch

➤

If your DADM or DSS console is equipped with a 

Line

 button, you can answer Exchange line calls 

from the DADM or DSS console as you would from a digital telephone. See 

 for 

detailed information.

➤

➤

Press the flashing 

Line

.

Your DADM or DSS console may be equipped with 

SD

 (Speed Dial) buttons that can be programmed 

to dial telephone numbers or to access features. 

SD

 buttons on either the DADM or DSS console 

function like 

SD

 buttons on digital telephones. See 

 for information.

1. Press [DSS] corresponding to 

the busy station to be called.

You may hear a busy tone. The original caller is placed 
automatically on hold. The Line or [DN] LED flashes green at 
double the on-hold rate, and the [DSS] LED remains steady 
red.

2. Hang up.

The call rings the called station once with the camp-on tone. 
While the called station is receiving this tone, the Line LED 
flashes green (on-hold rate) or if you are on a [DN] button, it 
goes idle. The [DSS] LED remains steady red.

When the called station answers the transferred call, the Line 
LED becomes steady red. The [DSS] LED remains steady red. 

If the busy station is in the DND mode, the call will 
not transfer, but will recall your telephone 
immediately.

If the call is not answered after a specified Recall time set in 
system programming, camp-on is cancelled and the 
transferred call rings back.