Intel D850GB Benutzerhandbuch

65

Maintenance

Main

Advanced

Security

Power

Exit

Quiet Boot

• Disabled
•  Enabled (default)

Disabled displays normal POST messages.

Enabled displays OEM graphic instead of POST messages.

Intel Rapid BIOS
Boot

• Disabled
•  Enabled (default)

Enables the computer to boot without running certain POST
tests.

Scan User Flash
Area

•  Disabled (default)
• Enabled

Enables the BIOS to scan the flash memory for user binary
files that are executed at boot time.

After Power Failure

• Stay Off
•  Last State (default)
• Power On

Specifies the mode of operation if an AC power loss occurs.

Stay Off keeps the power off until the power button is
pressed.

Last State restores the previous power state before power
loss occurred.

Power On restores power to the computer.

On Modem Ring

•  Stay Off (default)
• Power On

In APM mode only, specifies how the computer responds to
an incoming call on an installed modem when the power is
off.

On LAN

• Stay Off
•  Power On (default)

In APM mode only, determines how the system responds to
a LAN wake up event.

On PME

•  Stay Off (default)
• Power On

In APM mode only, determines how the system responds to
a PCI power management event.

On ACPI S5

•  Stay Off (default)
• Power On

In ACPI mode only, determines the action of the system
when a LAN wake up event occurs.

1

st

  Boot Device

2

nd

  Boot Device

3

rd

  Boot Device

4

th

  Boot Device

• Floppy
• ARMD-FDD (Note 1)
• ARMD-HDD (Note 2)
• IDE-HDD (Note 3)
• ATAPI CD-ROM
•  Intel UNDI, PXE 2.0

(Note 4)

• 

Disabled

Specifies the boot sequence from the available devices.  To
specify boot sequence:

1.  Select the boot device with <

↑> or <↓>.

2.  Press <Enter> to set the selection as the intended boot

device.

Not all of the devices in this list are available as second,
third, and fourth boot devices.  The default settings for the
first through fifth boot devices are, respectively:
• Floppy
• IDE-HDD
• ATAPI CD-ROM
•  Intel UNDI, PXE 2.0
• Disabled

continued