ColorVision c2630D Benutzerhandbuch

Multi-bypass tray 
settings display 
ON/OFF

Turn this setting ON if you want the “Bypass setting” screen 
to be displayed whenever the “Bypass” key is pressed in the 
“Basic” tab.

On / Off

Off

Paper weight

Sets the weight of each paper type. 
Use the following weights (g/m²) when configuring this 
setting. 
Light:

 Approx. 60 g/m²

Normal 1:  60 – 74 g/m²
Normal 2:  75 – 89 g/m²
Normal 3:  90 – 105 g/m²
Heavy 1:  91 – 120 g/m²
Heavy 2:  121 – 160 g/m²
Heavy 3:  161 – 220 g/m²
* When an optional Document Finisher is installed, be sure 

to configure this setting to match the paper type (drawer 
[cassette] No.1 – No.4). An incorrect setting can cause 
paper jams. 

Light
Normal 1 – 3
Heavy 1 – 3
Extra Heavy

Depends on the 
paper type.
See “ Paper 
weight” on 
page 7-50 for 
details.

Custom paper type 
for 2-sided copying

Sets whether or not each custom paper type (custom 1 – 
custom 8) will be available for use in 2-sided copying.

On / Off

On

Auto sleep time

Sets the amount of time that will elapse after copying, or if 
no operation is performed, before the auto sleep function 
engages and turns the copier OFF.
* It is recommended that you try to set a longer time 

interval before auto sleep function engages if you use the 
copier frequently, and to a shorter time if there are long 
intervals between use.

1, 5, 15, 30, 45, 60, 
90, 120, 180 and 240 
(minutes)

60 (minutes)

Auto low power time Sets the amount of time between the point that copying ends 

and the energy-saving Low power mode engages.

1, 5, 15, 30, 45, 60, 
90, 120, 180 and 240 
(minutes)

15 (minutes)

Copy eject location

Sets the location for ejection of finished copies. 
* This setting is displayed when an optional Document 

Finisher or the Left Tray is installed on the copier. 

* When an optional Document Finisher is installed, Select 

“Top tray” and “Finisher.” When the Multi Job Tray is 
installed, you can select from among “Top Tray,” “Tray A,” 
and “Tray 1” through “Tray 5.” 

* “Top tray” and “Left tray” options are available when the 

optional Left Tray is installed. 

Top tray
Tray A
Tray 1 – 5
(Finisher)
(Left Tray)

Top tray

Fax eject location

Sets the location for ejection of received faxes and for printed 
reports.
* This setting is only available when the optional Fax Kit 

and Document Finisher are installed on your copier.

* When an optional Document Finisher is installed, Select 

“Top tray” and “Finisher.” When the Multi Job Tray is 
installed, you can select from among “Top Tray,” “Tray A,” 
and “Tray 1” through “Tray 5.” 

Top tray
Tray A
Tray 1 – 5
(Finisher)

Top tray

Default operation 
mode

Sets which operation mode, the copy operation mode or the 
fax operation mode, will be selected when the power is 
turned on to the copier.

Copy mode
FAX mode

Copy mode

Touch panel sound 
ON/OFF

Sets whether or not the touch panel will emit a “beep” sound 
each time a key is touched.

On / Off

On