Panasonic KX-THA11 Benutzerhandbuch
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp
35
Caller ID number auto edit
You can turn the Caller ID number auto
edit feature on or off.
edit feature on or off.
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Caller ID edit” i {SELECT}
3
Select the desired setting. (Default:
“On”) i {SAVE} i {OFF}
“On”) i {SAVE} i {OFF}
Setting telephone line
Line selection
The line selection mode determines which
line is selected when you press {C}.
– “Auto”: When making a call, line 1 is
The line selection mode determines which
line is selected when you press {C}.
– “Auto”: When making a call, line 1 is
selected. If that line is unavailable, line 2
is selected. When answering a call, the
ringing line is selected.
is selected. When answering a call, the
ringing line is selected.
– “Line1”: Line 1 is selected.
– “Line2”: Line 2 is selected.
– “Line2”: Line 2 is selected.
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Set tel line” i {SELECT}
3
“Line select” i {SELECT}
4
Select the desired setting. (Default:
“Auto”) i {SAVE} i {OFF}
“Auto”) i {SAVE} i {OFF}
Note:
L
You can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
L
You only need to program this setting
once, using either the handset or base
unit.
once, using either the handset or base
unit.
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Set tel line” i {SELECT}
3
“Set dial mode” i {SELECT}
4
Select the desired setting. (Default:
“Tone”) i {SAVE} i {OFF}
“Tone”) i {SAVE} i {OFF}
Flash time
The flash time depends on your telephone
exchange or host PBX.
The flash time depends on your telephone
exchange or host PBX.
L
You only need to program this setting
once, using either the handset or base
unit.
once, using either the handset or base
unit.
Important:
L
The setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
pressing {FLASH} fails to pick up the
Call Waiting call.
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Set tel line” i {SELECT}
3
“Set flash time” i {SELECT}
4
Select the desired line.
5
Select the desired setting. (Default:
“700ms”) i {SAVE} i {OFF}
“700ms”) i {SAVE} i {OFF}
Note:
L
If the base unit is connected via a PBX,
certain PBX functions (call transferring,
etc.) may not work correctly. Consult
your PBX supplier for the correct setting.
certain PBX functions (call transferring,
etc.) may not work correctly. Consult
your PBX supplier for the correct setting.
THA11.book Page 35 Tuesday, March 7, 2006 5:56 PM