Panasonic DBS 824 Benutzerhandbuch
2.0 Features Update
Appendix A
A-8
DBS 824-3.0/3.2-700
Revised April 2000
Notes
Available on small-display phones only. This feature applies to the 44-series
small-display phone only (i.e., phones with a 2-line LCD display).
small-display phone only (i.e., phones with a 2-line LCD display).
Incompatibility with older phone versions. Directory Mode is available on the
44-Series phones only.
44-Series phones only.
Hot Dial Pad and Directory Mode. The Hot Dial Pad feature (FF3 ExtPort# 47#)
will not work on an extension in Directory Mode.
will not work on an extension in Directory Mode.
Variable Mode
44-Series phones only
CPC-S/M Version 2.0 and higher
CPC-S/M Version 2.0 and higher
Description
This feature applies to the 44-series small-display phone only (i.e., phones with a
2-line LCD display).
2-line LCD display).
When the phone is in Variable Mode, the features for Flexible Function Screen
select keys 1 and 2 will display during each of the following call states:
select keys 1 and 2 will display during each of the following call states:
Call State
Existing Program Address*
• During an intercom call
FF3 (ExtPort)# 28# (25-39)#
• During CO dial tone
FF3 (ExtPort)# 29# (25-39)#
• During a trunk call
FF3 (ExtPort)# 30# (25-39)#
• After dialing a busy extension FF3 (ExtPort)# 33# (25-39)#
* In these addresses, you assign a Flexible Function Screen (25-39) to appear on
the extension while it is in the call state.
the extension while it is in the call state.
Operation
The select keys on the 44-series small-display phone are labeled “>” and “<“ to the
left and right of the display’s 2nd line. Pressing select key 1 (“>” on the left) or
select key 2 (“<“ on the right) will perform the displayed feature.
left and right of the display’s 2nd line. Pressing select key 1 (“>” on the left) or
select key 2 (“<“ on the right) will perform the displayed feature.
To use Variable Mode:
1.
Activate Variable Mode by pressing
ON/OFF *61 ON/OFF
.
• When you dial
*61
in the above sequence, the 1st line of the LCD
will display “Variable md ON”. The display will return to normal
when you press the second
when you press the second
ON/OFF
.
• Use existing addresses FF1 2# 7# 2# to assign screen text.
• The
• The
*61
code toggles Variable Mode on and off. Press
ON/OFF *61
ON/OFF
again to turn Variable Mode off.
2.
While the extension is engaged in an intercom call, the 2nd line will
display select key 1 and 2 features from the Flexible Function Screen
display select key 1 and 2 features from the Flexible Function Screen