Panasonic 524X07801B Benutzerhandbuch

Seite von 334
190
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
N/A
Related Programming
N/A
Considerations
An alarm tone (default = 16 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3 
minutes later.
Trunk Access
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following ways to seize an idle trunk to make an outside code:
CO Line Trunk Access
Direct Trunk Access
MCO Line Preference
Action
Result
1.   Lift the handset or press the ON/OFF key.
Intercom dial tone
2.   Enter the Timed Reminder Set code (default = *31).
Enter Alarm hhmm
 displays
3.   Enter the time you want the Timed Reminder Call to sound. 
(Enter the time in 24-hour format. For example, 0100 for 1 
AM, 1300 for 1 PM).
4.   Replace the handset or press the ON/OFF key.
Alarm HH:MM
 displays (where HH = 
hour and MM = minutes)
Action
Result
1.   Lift the handset or press the ON/OFF key.
Intercom dial tone
2.   Enter the Timed Reminder Cancel code (default = *39).
3.   Replace the handset or press the ON/OFF key.
Time display disappears