Cisco Systems SPA508G Benutzerhandbuch
Using Advanced Phone Features
Using the Interactive Voice Response Menu on the Cisco SPA501G
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
61
4
Using the Interactive Voice Response Menu on the
Cisco SPA501G
Cisco SPA501G
The Cisco SPA501G provides an interactive voice response menu. You can enter
options and receive information about the phone and its operation.
options and receive information about the phone and its operation.
To access the IVR:
STEP 1
Press the Setup button.
Enter the IVR option by pressing the numbers of the option, then press #. Some
menus require entering of further information or numbers.
menus require entering of further information or numbers.
Typical options you might use are listed in the following table:
Number
Option
100
Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled.
110
Recites the IP address of the phone.
120
Recites the netmask of the phone.
130
Recites the gateway address.
140
Recites the MAC (hardware) address of the phone.
150
Recites the phone software version.
160
Recites the primary DNS server address.
170
Recites the HTTP port on which the web server listens. Defaults to 80.
180
Recites the IP multicast address (used by a
Cisco Voice System
to
communicate with the IP phone).
220
Recites the method of call control (SIP or SPCP).
221
Set call control—enter the value for the call control method you want,
then press #:
then press #:
•
0: SIP
•
1: SPCP
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.