VTech mi6890 Benutzerhandbuch

31

Before using the answering system, you should follow the steps below to set the day and time, so 

messages are dated correctly. Each time you press the 

CHANGE button on the telephone base, the 

day, hour, minute, or year increases by one. When you hear the correct setting, press 

TIME/SET to 

move to the next setting. Pressing and holding the 

CHANGE button when setting the day and time 

will increase the minute or year by increments of 10.
1.  Press 

TIME/SET, the system announces the current setting.

.  Press 

TIME/SET again.

3.  The answering system will announce the current day setting. Press 

CHANGE on the base until 

you hear the correct day. 

4.  Press 

TIME/SET, the system announces the current hour setting.

5.  Press 

CHANGE until you hear the correct hour.

6.  Press 

TIME/SET, the system announces current minute setting.

7.  Press 

CHANGE until you hear the correct minute.

8.  Press 

TIME/SET, the system announces the current year setting.

9.  Press 

CHANGE until you hear the correct year.

10. Press 

TIME/SET to confirm. The system announces the new time and day setting followed by a 

confirmation beep.

Press 

TIME/SET at any time and the system will announce the current setting without changing it.

•  If you have caller 

ID service, 

the time will 

automatically 

be updated 

whenever caller 

ID information 

is delivered.  

However, since 

the date, rather 

than the day, is 

delivered, you 

have to program 

the year once, so 

the system can 

determine the 

day of the week.