GE 00009246 Benutzerhandbuch

5. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset)

button again to save your selection. The display shows

ENTER TEL NUMBR.

NoTE: If you make a mistake, press the dELETE button on the base

or CHAN/delete on the handset to backspace and erase the wrong

character(s) or number(s).

6. Use the touch-tone pad to enter the area code followed by the telephone number

(up to 4 digits, including pauses) and press the MEM/CONFERENCE (base) or
MEMORY/conference (cordless handset) button again to save your selection. The
unit beeps to confirm.

7. To enter another name and number in a different memory location, return to step 1

and repeat the process.

Storing a Redial Number

1. Make sure the phone is

oFF (not in TALK mode).

. Perform steps 1 through 5 from the previous section, Storing A Name And Number

In Memory.

3. Press REDIAL to display the redial number and name.
4. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset)

button again to confirm.

NoTE : If the number you want to redial has more than 24 digits,

the telephone number cannot be stored in memory.

Inserting a Pause in the dialing Sequence

Press the #PAUSE button (base) or the PAUSE# (cordless handset) on the touch-tone pad

to insert a delay in the dialing sequence of a stored telephone number when a pause

is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait

for a computer access tone.) Each pause counts as 1 digit in the dialing sequence.

Reviewing, Changing or deleting Stored Names/Numbers

To Review: Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button, then press the REVIEW or NEXT button (base) or the VOL/CID (- or +)
button (cordless handset) to scroll through the stored numbers. Or press the memory
location number.