Dialogic Global Call IP Benutzerhandbuch
Dialogic
®
Global Call IP Technology Guide — November 2007
441
Dialogic Corporation
initialize IP_VIRTBOARD data structure — INIT_IP_VIRTBOARD( )
INIT_IP_VIRTBOARD( )
initialize IP_VIRTBOARD data structure
Description
The INIT_IP_VIRTBOARD( ) function is used to initialize an
data structure,
which contains configuration data for a specific virtual IPT board. This function must be called to
initialize an IP_VIRTBOARD structure for each virtual board that will be defined by calling
initialize an IP_VIRTBOARD structure for each virtual board that will be defined by calling
before calling gc_Start( ).
After the structure is initialized, an application can overwrite any of the defeat values as
appropriate to the specific requirements. Among the items controlled by the IP_VIRTBOARD
structure and initialized by this function are:
appropriate to the specific requirements. Among the items controlled by the IP_VIRTBOARD
structure and initialized by this function are:
•
maximum number of calls (total, H.323, and SIP)
•
local IP address and signaling ports for H.323 and SIP
•
H.323 Terminal Type (default is Gateway)
•
enable access to H.323 message information fields (default is disabled)
•
enable call transfer supplementary service (default is disabled)
•
enable access to SIP message header fields and MIME-encoded message bodies (default is
access disabled for both headers and MIME bodies)
access disabled for both headers and MIME bodies)
•
enable and configure a SIP outbound proxy (default is disabled)
•
enable and configure TCP transport for SIP requests (default is disabled)
•
configure SIP request retry behavior (default enables all allowable retries)
•
enable application access to SIP OPTIONS requests (default is disabled)
•
configure maximum number of SIP registrations (default equals max. number of SIP calls)
Cautions
None.
Name:
void INIT_IP_VIRTBOARD(pIpVb)
Inputs:
IP_VIRTBOARD *pIpVb
•
pointer to the structure to be initialized
Returns:
None
Includes:
gcip.h
Mode:
synchronous
Parameter
Description
pIpVb
points to the IP_VIRTBOARD data structure to be initialized. See
, on page 553, for information on the default values and
optional values that may be after initialization.