Vivitek du6871 Benutzerhandbuch

Seite von 54
15
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Cautions on ventilation
The product is a high-brightness projector. The intake with filters are located on the front and 
right sides to provide sufficient air for cooling. The projector has two vents on the back for 
cool air discharging� Make sure the intake and vent are unobstructed when the projector is 
being installed� At least 50cm around the intake and 70cm around the vent should be clear�
50cm above
50cm above
70cm above
30cm above
R/Pr
G/Y
B/Pb
HDBaseT / LAN
3D Sync Out
RGB IN
RS-232
USB
TRIGGER
H
V
Display Port
DVI-D
WIRE
RGB OUT
HDMI
MENU
EXIT
POWER
INPUT
AU
TO 
SYN
C
ASPEC
T
FOCUS
LENS
SHIFT
ZOOM
SHUTTER
CENTER
LENS
Note:
•  If the installation distance is not enough, the projector may enter the system protection mode due to the
rising ambient temperature after running for a while. Then, projection may be interrupted.
•  The service life of components or lamps may be reduced due to the long-term effect of the ambient
temperature if the installation distance is not appropriate.
•  If the projector has to be installed in a box or a closed environment due to the installation requirements,
the external intake and vent system should be designed additionally to ensure that there is enough air for
cooling or the projector will not be surrounded by heat.