Sony KP-44PX2U Benutzerhandbuch

 

• After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors
or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

• To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

• Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

• Avoid touching the screen, and take care not to scratch the surface with hard objects.

•

 

An “image ghosting”, or “screen burn” may appear on the screen if the television is left operating with, either a still image, or a
programme displaying a bright corner channel logo, for an extended period of time. The risk of this is higher if the set is in “Live”
mode or has a hight contrast setting. This image cannot be removed once burnt onto the screen. To avoid the risk of occurrence do
not leave the television operating on such a picture, or programme for long periods of time. Repeated extended daily usage of the
same image, or programme can also result in this occurrence which is not covered by the Sony warranty.

 

Do not open the cabinet and the rear cover of 
the TV. Refer to qualified service personnel 
only.

To prevent fire or shock hazard, do not 
expose the TV to rain or moisture.

For your own safety, do not touch any part 
of the TV, power lead or aerial lead during 
lightning storms. 

Do not cover the ventilation openings of the 
TV For ventilation, leave a space of at least 
10cm all around the set.

To prevent fire, keep inflammable objects or 
naked lights (eg candles) away from the TV.

Pull out the power lead by the plug. Do not 
pull on the power lead itself.

Take care not to place heavy objects on the 

power lead as this could result in damage.

We recommend you wind any excess lead 

around the holders provided on the rear of 

the TV.

Place the TV on a 
secure stable stand. Do not allow children to 
climb on to it. Do not place the TV on its side 
or face up.

Do not cover the ventilation openings of the 
TV with items such as curtains or 
newspapers etc.

Never push objects of any kind into the set as 

this could result in a fire or electric shock. 

Never spill liquid of any kind on the set. If 

any liquid or solid object does fall into the 

cabinet, do not operate the TV. Have it 

checked immediately by qualified personnel.

For environmental and safety reasons, it is 

recommended that the TV set is not left in 

standby mode when not in use. Disconnect 

from the mains.

This set is to operate on a 220-240V AC 

supply only. Take care not to connect too 

many appliances to the same power socket 

as this could result in fire or electric shock.

Unplug the power lead before moving the 
TV. Avoid uneven surfaces, quick steps or 
excessive force. If the set has been dropped 
or damaged, have it checked immediately 
by qualified service personnel.

Never place the TV in hot, humid or 
excessively dusty places. Do not install the 
TV where it may be exposed to mechanical 
vibrations.

 

Clean the screen and cabinet with a soft, 
lightly dampened cloth. Do not use any type 
of abrasive pad, alkaline cleaner, scouring 
powder or solvent, such as alcohol or 
benzine, or antistatic spray. As a safety 
precaution, unplug the TV before cleaning it.

 

03GBKP44PX2U.fm  Page 4  Tuesday, January 14, 2003  4:29 PM