Sony Qualia 006 Benutzerhandbuch

SXRD

2-584-141-12(1)

The indicators show the current status of your SXRD projection TV.

To minimize reflection, the screen’s surface has a special coating. Read the 
instructions “Cleaning the Screen Surface” on page 17 carefully before 
cleaning. Inappropriate cleaning methods could damage the screen’s finish.

The left and right speakers output audio signal. The speakers are packed 
separately in the packing box. For details on how to attach the speakers to 
the TV, see page 18.

Your SXRD projection TV uses a projection lamp as its light source. The 
projection lamp is located under the Front Panel Cover as noted in the 
diagram above. Note the following:

❑

The SXRD projection TV cools down its projection lamp when the 
power is turned off. It takes up to two minutes for the picture to come 
back after the TV is turned on again. The POWER/STANDBY LED 
blinks in green while the picture is coming up.

❑

When the projection lamp wears out, the screen goes dark. Replace the 
lamp with a new Sony XL-5000 replacement lamp (not supplied).

✍

After replacing the lamp, be sure to attach the lamp cover securely; 
otherwise, your SXRD projection TV will not turn on. For details on lamp 
replacement, see “Replacing the Lamp” on page 20.

✍

The light emitted from the lamp is quite bright when your SXRD 
projection TV is in use. To avoid eye discomfort or injury, do not look 
into the housing when the power is on. 

✍

The projection lamp is a consumable product that wears out after use for 
a certain period of time. When the lamp wears out, replace it with a new 
one so that you can enjoy the original quality of the SXRD picture again.