Zenith R40W46 Benutzerhandbuch
19
Color Convergence Adjustment
(R40W46, R40W46F, R45W46, R45W46F only)
(R40W46, R40W46F, R45W46, R45W46F only)
Use this function to adjust the R-G-B color convergence while a stable
signal is being received. When the TV is first installed or if it is
relocated, the picture may be unstable with three color ghosts (red,
green, blue). This problem can be solved by adjusting the color
convergence.
signal is being received. When the TV is first installed or if it is
relocated, the picture may be unstable with three color ghosts (red,
green, blue). This problem can be solved by adjusting the color
convergence.
1. Press the menu button and then use
D
/
E
button to select the
Picture menu.
2. Press the
G
and then use
D
/
E
button to select
Convergence
.
3. Press the
G
and then use
D
/
E
button to select
1
(all point
convergence) or
9
(9 point convergence) .
If the
+
display is not white and shows three color ghosts, the color
convergence needs to be adjusted. If the
+
display is white, color
convergence does not need to be adjusted.
4. Press the
G
and then press the tv/video button.
The display button is selected in red or blue.
5. Only selecting
9
: Use the number (0~9) button to select the
position your want to adjust the convergence.
6. Use the
D
/
E
/
F
/
G
button to superimpose the
+
display (red or
blue) over the green
+
. It will be changed to yellow or cyan.
7. When both red and blue
+
display is superimposed over green, the
+
display changes to white.
8. Press the exit button to return to TV viewing.
Note: If the picture needs to be adjusted more
1
(all point
convergence) adjustment, you can adjust the
9
(9 point
convergence) for the position you want to adjust.
Auto Convergence Adjustment
(R50W46 and R57W46 only)
(R50W46 and R57W46 only)
When the TV is first installed or relocated, the picture may be unstable
and have three color ghosts (red, green, blue). This problem can be
solved with Auto Convergence. This function can adjust the picture
color convergence automatically if the TV is receiving a stable signal.
and have three color ghosts (red, green, blue). This problem can be
solved with Auto Convergence. This function can adjust the picture
color convergence automatically if the TV is receiving a stable signal.
1. Press the menu button and then use
D
/
E
button to select the
Picture menu.
2. Press the
G
and then use
D
/
E
button to select
Convergence
.
3. Press the
G
button to start auto convergence.
The color convergence order will be: blue, green, then red.
The auto convergence function takes about 60 seconds.
The auto convergence function takes about 60 seconds.
Notes: • Wait 20 minutes after turning on the TV before using Auto
Convergence.
• Darken the room before adjusting color convergence.
TV
/
VIDEO
ENTER
MENU
CH.
+
+
Move
{
Next
+
}
}
Back
EZ Video
{
{
DRP
{
{
Cinema
{
{
VM
{
{
ACC
{
{
Contrast
{
{
Brightness
{
{
Color
{
{
Sharpness
{
{
Tint
{
{
Convergence
{
{
Picture
1
9
9
{
1
{
CH.
+
+
Move
{
Next
+
}
}
Back
EZ Video
{
{
DRP
{
{
Cinema
{
{
VM
{
{
ACC
{
{
Contrast
{
{
Brightness
{
{
Color
{
{
Sharpness
{
{
Tint
{
{
Convergence
{
{
Picture
To start
Convergence
{