EIKI EIP-5000 Benutzerhandbuch
79
Auto Power Off Function
Menu operation
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of Auto Power Off
Note
• When “Auto Power Off” is set to “ON”, 5 min-
utes before the projector enters the standby
mode, the message “Enter STANDBY mode in
X min.” will appear on the screen to indicate
the remaining minutes.
mode, the message “Enter STANDBY mode in
X min.” will appear on the screen to indicate
the remaining minutes.
Description
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
The “Auto Power Off” function will be
disabled.
standby mode when no input signal is
detected for 15 minutes or longer.
The “Auto Power Off” function will be
disabled.
Selectable items
ON
OFF
This function prevents unauthorized use of the pro-
jector. Once this function is activated, users must enter
the correct keycode each time the projector is turned
on. We suggest you record the keycode in a safe place
where only authorized users have access.
jector. Once this function is activated, users must enter
the correct keycode each time the projector is turned
on. We suggest you record the keycode in a safe place
where only authorized users have access.
Info
• If you lose or forget your keycode, contact your
nearest EIKI Authorized Dealer or Service
Center. Even if the product warranty is valid, the
keycode reset will incur a charge.
Center. Even if the product warranty is valid, the
keycode reset will incur a charge.
Menu operation
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Setting the keycode
1
Select “System Lock” on the “Op-
tions (1)” menu, then press |
tions (1)” menu, then press |
|
|
|
|.
• A message is displayed.
• Read this message, and press
• Read this message, and press
.
2
Press the 4 buttons on the remote
control or on the projector to enter
the preset keycode in “Old Code”.
control or on the projector to enter
the preset keycode in “Old Code”.
• When setting the keycode for the first time,
press " on the projector for four times.