Mitsubishi Electronics FX3G-EEPROM-32L Benutzerhandbuch

16 Display Module (FX3S-5DM)

FX

3S

 Series Programmable Controllers

User's Manual - Hardware Edition

Display and setting can be performed for the current time.

Year, month, day, hour and minute are displayed when the power is
turned ON.

1) Press and hold the [OK] button for 2 seconds or more to make data

blink.

2) Use the [+] / [-] buttons to change the blinking data as desired.
3) Press the [OK] button to determine the input. 

Set "year, month, day, hour and minute" in this order.
When the [OK] button is pressed at "minute" set up, the setting operation will be completed.
Press the [ESC] button to return to the previous set item.
While the "year" data is blinking, however, pressing the [ESC] button cancels the previous time setting
and returns to the time display screen.

PLC errors and keyword error are displayed.

When an error occurs in the PLC, the error step No. and error code are displayed.
One of the following errors is displayed when it occurs:
PLC hardware error, Parameter error, Syntax Error, Circuit error
Whether or not operation errors, etc. are to be displayed can be selected from the program.

Refer to Subsection 14.6.3 for error code.

Refer to Section 16.12 for error display valid/invalid.

Press an operation button on the display module while an error is displayed to return to the screen displayed
before the error display screen.

When the keyword is registered in the PLC, only "Time display and
setting" and "Error display valid/invalid" are displayed, and other items
cannot be displayed.
If the [OK] button is pressed when the keyword is registered, the error
display blinks for 5 seconds.
Release the keyword by using a peripheral unit.

[1]

Error step No.

[2]

Error code

[1]

[2]