Beko DCU 6130S Benutzerhandbuch

18 EN

In order to add or remove laundry after the 
programme starts:
1.  Press the “Start/Pause/Cancel” button to 

switch the dryer to “Pause” mode. Drying 
process will stop.

2.  Open the door at “Pause” position and 

close it again after adding or taking out 
laundry.

3.  Press “Start/Pause/Cancel” button to start 

the programme.

C

 Any laundry added after the drying process 

has started may cause the dried clothes in 
the machine intermingle with wet clothes 
and the result will be wet laundry after the 
drying process is over.

C

 Laundry may be added or taken out 

as much as desired during a drying 
process, but this process will extend the 
programme duration and increase energy 
consumption since the drying will be 
interrupted continuously. Therefore, it is 
recommended to add laundry before the 
drying programme has started.

There is a child-proof lock to prevent any 
programme interruption due to the pressing of 
button while the programme is running. The 
loading door and all buttons except the “On/
Off” button on the control panel are deactivated 
when the child-proof lock is active.
Press the “Start/Pause/Cancel” and “Cancel 
audio warning” buttons simultaneously for 3 
seconds to activate the child-press lock. 
To start a new programme after the programme 
is over or to interrupt the programme, the child-
proof lock should be deactivated. Press the 
same buttons for 3 sec. again to deactivate the 
child-proof lock.

C

 Child-proof lock is deactivated when the 

machine is restarted by pressing the On/Off 
button.

C

 Press the relevant buttons for 3 seconds 

to activate the child-proof lock. A long 
beep will be heard and the child-proof lock 
will be activated. A double beep will be 
heard if you press any button or turn the 
programme selection knob while the child-
proof lock is active. Press the buttons for 3 
seconds to deactivate the child-proof lock. 
Single beep will be heard and child-proof 
lock will be deactivated.

A

 A double beep will be heard if you turn 

the programme selection knob when the 
machine is running and the child-proof lock 
is active. If you deactivate the child-proof 
lock without returning the programme 
selection knob to its previous position, the 
programme will be terminated since the 
position of the programme selection knob 
is changed. The drying light turns on and 
the machine remains on hold until a new 
programme is selected and the “Start/
Pause/Cancel” button is pressed.

To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3 
seconds. The “Filter cleaning”, “Water tank” and 
“End/ Anti-creasing” warning lights will turn on 
at the end of this period for reminding purposes.

A

 As the inside of the dryer will be excessively 

hot when you cancel the programme while 
the dryer is running, activate the ventilation 
programme to cool it down.