Cisco Systems Linksys PAP2 Benutzerhandbuch
2.1.
Phone Adapter LED Status
LED
Color(s)
Activity
Description
Off Power
OFF
Blue On
Power On / Device Ready
Blue Blinking
Booting / System Self-Test / Firmware upgrade
Power
Blue
Red On
POST (Power On Self Test) failure (not bootable)
or Device malfunction
or Device malfunction
Off
No Connection on Ethernet
Blue On
Ethernet Connection established
Ethernet
Blue
Blue Blinking
Data Sending / Receiving
Off
Phone is not in use/not provisioned or registered
Blue On
Registered/provisioned
Phone 1 /
Phone 2
Phone 2
Blue
Blue Blinking
Phone is in use/Incoming Call detected
2.2.
Broadband Router (RT31P2) LED Status
LED
Color(s)
Activity
Description
Off Power
OFF
Solid Green
Power On
Green
Blinking
Blinking
Booting / System Self-Test / Firmware upgrade
Power
Green
Red On
POST (Power On Self Test) failure (not bootable)
or Device malfunction
or Device malfunction
Off
No Connection on Ethernet
Solid Green
Ethernet Connection established
Ethernet
Blue
Green
Blinking
Blinking
Data Sending / Receiving
Off
Phone is not in use/not provisioned or registered
Green On
Registered/provisioned
Phone 1 /
Phone 2
Phone 2
Blue
Green
Blinking
Blinking
Phone is in use/Incoming Call detected
4. One 5 Volt Power Adapter Interface (Figure 3, above) for PAP2 Phone Adapter and 12 Volt Power
Adapter for the Broadband Router (RT31P2)
Adapter for the Broadband Router (RT31P2)
This interface accepts the PHONE ADAPTER power adapter that came with the unit. Linksys does
not support the use of any other power adapters other then the power adapter that was shipped with
the PHONE ADAPTER unit or the Broadband Router (RT31P2)
not support the use of any other power adapters other then the power adapter that was shipped with
the PHONE ADAPTER unit or the Broadband Router (RT31P2)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
19